Faux Bamboo Molding Panel

Description of Faux Bamboo Molding Panel:

Bamboo Molding is harvested from the outer skin and wall of large diameter bamboo and cut into strips along the length of the pole.

Unbelievably realistic and lightweight, our Faux Bamboo Molding Panel is a pre-finished panel suitable for interior and exterior applications.

Call NOW to find out more information on Bamboo Molding Panel - Toll Free: (877) 243-5309

Features of Faux Bamboo Molding Panel:

• High density polymer molded to resemble real bamboo molding strips

• Colors in tan and green

Faux Bamboo Molding Panel Specifications:

• 4' high x 2' wide panels, with bamboo run vertically along 4' length

• Impervious to moisture and insects

• UV protected

• Environmentally sound

• Option to ship pre-fire retarded to a "Class A"

Applications of Faux Bamboo Molding Panel:

• Backdrops for signs

• Decorative wall cover in spas and restaurants

• Wainscoting in homes

FAQs About Faux Bamboo Molding Panel:

if I have the faux bamboo molding panel as a wainscot and need to clean it, what is the best method?

Clean with a damp cloth only. Do not use detergents.

How do I install the Faux Bamboo Molding Panel?

With use of construction adhesive and screws. Always test a small section first.

Installation and Care Instructions:

Storing Faux Bamboo Molding Panels

Store Faux Bamboo Molding Panels flat on a surface in order to avoid 'bowing'. If panels are stored in an upright position and do bow, lay them flat and they will self-correct.

General Installation Guidelines

Faux Bamboo Molding Panels are installed using construction adhesive and screws. However, panels may expand and contract with temperature changes and must be installed tightly. To minimize the effect of expansion and contraction, install the panels as tightly as possible and follow the storage and installation instructions carefully.

First, install Faux Bamboo Molding Panels on solid backing. Then run a bead of adhesive along the back of each panel and at each end. Make sure to spread the adhesive with a spackle knife or other appropriate tool. Use enough adhesive so that the entire surface of the cut edge at each end is covered.

We strongly recommend use of construction adhesive and screws in every joint. All joints should be butt joints on straight runs and mitered joints in corners. Faux Bamboo Molding Panels may require additional shimming and trimming for alignment. Finish seams with color-matched caulk available through amaZulu, Inc.

Hot Weather Installation

If Faux Bamboo Molding Panels have been stored under hot conditions, allow panels to cool down to normal temperature before installation.

Cold Weather Installation

If Faux Bamboo Molding Panels have been stored at room temperature or cooler, you may install panels immediately.
 

Pricing of Faux Bamboo Molding Panel:

Click thumbnail to view larger image

Faux Bamboo

Molding Panel

Faux Bamboo Molding Panel in Natural Color

Faux Bamboo Molding Panel in Aged Color

Faux Bamboo Molding Panel

Close-Up

Faux Bamboo Molding Panel

Faux Bamboo Molding Panel

Faux Bamboo Molding Panel

Underside of Faux Bamboo Molding Panel

Faux Bamboo Molding Panel - Green Table

Faux Bamboo Molding Panel Sign