Tahiti Thatch

Tahiti Thatch panels are thick in texture which creates a chunky rustic thatch for umbrellas and roof structures.

split

Features:

  • The thickness of Tahiti Thatch allows for at least 98% waterproofing when installed at 12" on center.
  • Thatch is flexible which make it versatile for straight or undulated roof lines and round umbrellas.
  • The nylon rope thatch sews the thatch together in panels can be cut and retied if the panel needs to be cut to size.


Tahiti Thatch Panels are often used for projects where one needs a rustic type thatch. Because it is so thick and full, these thatch panels are great for umbrlla canopies , concession stands or animal exhibit shelters.
  • Tahiti Thatch is made from pieces of hardy desert palm leaves which are bound together along the top of the panel with a nylon rope.
  • Panels average 23” – 24” long x 37” wide x roughly 2” thick.
  • Each panel provides 3 sq ft roof coverage when installed 12” on center.
  • This thatch is sold in single panels.
  • Typically the thatch last between 5-6 years and even longer in dry climates (not good for snow conditions).
  • Panels can be Fire Retarded for indoor or outdoor applications and passes a class A, ASTM E-84 rating.
  • Tahiti Top Cones are available to finish off a circular structure.
  • Tahiti Thatch Panels are very quick and easy to install - no special tools or skills needed.
  • Thatch panels can either be zip tied to 1/4"  (8mm) steel rods of an amaZulu Umbrella frame or nailed or stapled to wooden battens.
  • The minimum suggested pitch should be 30 degrees, but a steeper pitch will increase water run-off and longevity.
  • The thatch tiles are installed in layered courses every 12” on center.
  • A ridge cap of split bamboo, or copper flashing can be used at the peak of a thatched structure or a Tahiti Top Cone for the peak of an umbrella.
PRODUCT QTY PRICE
Tahiti Thatch Panel - 37" W x 23"-24" L 1-sheet $26.00
Tahiti Thatch Top Cone 1-cone $68.00
Fire Retarding available - CALL FOR PRICING    

 

* Prices subject to change without notice.

FAQ: Tahiti Thatch

I am installing an amaZulu Tahiti Thatch umbrella and I need to cut a panel width as it is too long, how do I go about that?

Using a sharp edge, cut the panel and the cords at least 2” in additional from the desired finished width. Remove the palm fronds until you have the correct width. If you pull away the fronds and leave the cord there will be enough cord to tie a knot to seal the edges so that no additional fronds can come loose.

 

Can I install the Tahiti Thatch Panels directly onto an existing roof?

Absolutely, however we do recommend you attach a wooden lattice made of horizontal then vertical firing strips to the roof first. This allows ventilation and drainage around the thatch which increases the longevity of the product if it is able to “breathe”.

 

Can the Tahiti Thatch Panels be fire retarded?

Yes. In order to receive a Fire Retardant Certificate for your Fire Marshal, amaZulu can either pre-fire retarded the Tahiti Thatch Panels to a class A rating and then ship, or our applicators can fire retard your structure on site after thatching is complete. If you choose to apply the fire retardant yourself, this can be purchased from amaZulu, but we would not be able to issue a certificate.

 

Others who bought this product also purchased:

 

CALL NOW for more information about our TAHITI THATCH  - 877-243-5309